BernarProd
RO EN UA
Services Overturned truck Rail terminal Storage Crane transshipment Import from Ukraine Export to Ukraine Oversized cargo Steel and metal Timber and wood Grain and agri Wagon unloading Contact About us Crane rental Rail transshipment Bonded warehouse Ukraine–EU rail freight Break of gauge Wagon types Bogie exchange 1435 vs 1520 gauge Rail terminal Cargo About Contact Get a quote

Oversized

Handling oversized and out-of-gauge cargo

Oversized cargo is anything that exceeds normal dimensions or weight for its transport mode — too tall, too wide, too long or too heavy for standard handling. We handle the loading, unloading and transshipment of such pieces at our terminal with 50 and 80 tonne mobile cranes.

What counts as oversized

There is no single threshold. A piece is oversized when it no longer fits the normal envelope of the vehicle or the route carrying it, and that envelope differs between road and rail.

  • Exceeds the loading gauge in height or width.
  • Longer than the wagon or trailer bed.
  • Heavier than the axle limits allow without special arrangements.
  • Indivisible — it cannot be broken down and sent in parts.

We deal with the handling side. Route surveys, permits and escorts on the road are the transport operator's responsibility, not ours.

What we do with it

  • Unloading from wagons and trailers.
  • Loading onto wagons and trailers.
  • Transshipment between the two gauges.
  • Setting down and repositioning on site.
  • Interim storage in the open.

Why the terminal suits this cargo

Oversized pieces need space, reach and ground that will take the load. A yard with track on both gauges, cranes on site and open storage area covers all three in one place.

The alternative — moving an out-of-gauge piece between separate handling sites — adds a road movement that is usually the most expensive and most permit-heavy part of the whole chain.

The two numbers that decide everything

  • Weight. Not an estimate, not a class — the actual figure.
  • Geometry. Length, width, height, and where the lifting points sit.

Everything else — which crane, how it is rigged, where it stands — follows from those. We do not quote a lift without them.

Frequently asked questions

Frequently asked questions

How heavy a piece can you handle?

Our cranes are 50 and 80 tonnes; usable capacity depends on the working radius. Send the weight and dimensions for a firm answer.

Do you arrange road permits?

No. Permits and escorts for road movement are handled by the transport operator.

Can an oversized piece be stored on site?

Yes, in the open area, subject to space and to what the piece needs.

Can you transship it between gauges?

Yes, that is the main reason such cargo comes here.

What if the weight is unknown?

Then it has to be established first. We do not lift on a guessed weight.

Have an oversized piece to move?

Send the weight, the dimensions and a photo, and we will tell you if we can handle it.